Softwoods – This includes the most popular option for horse stalls which is Southern Yellow Pine. That being said, we always recommend to use the highest grade of wood that is possible for your project’s budget. This is because softwoods are generally not recommend for use inside horse stalls.
Is pressure treated wood safe for horses?
Pressure-treated wood, however, has arsenic and other heavy metals that can be harmful if large quantities are consumed. It is best to prevent horses from chewing pressure-treated boards.
Can you use plywood for horse stalls?
Stalls should be lined at least four feet up from ground level. Don’t use 1/4 inch plywood to line your stalls or you might someday find your horse with his foot caught between the lining and the wall. Two inch thick boards are best.
Can you use cedar for horse stalls?
Cedar types of bedding, which may be great for outdoor spaces, are wonderful at absorbing smells and urine. However, cedar horse bedding is a bit oily, and some horses might get stained.
How do I make my horse stall drain better?
Add a thick layer of 3/8 to 3/4-inch gravel, a minimum of 4 to 5 inches on top. It should be compacted well, returning to the original surface level. Top this with a quality stall matting of vulcanized rubber or polyethylene resin and your horse stall should drain well.
What wood is bad for horses?
Black walnut shavings are a toxic bedding for horses. The innermost wood of the black walnut causes toxicity after oral or skin contact. Bedding containing as little as 20 percent fresh black walnut shavings made from old or new wood can cause toxicity. Within a few hours of toxicity, the following signs occur.
What do you line a horse stall with?
There are many different types of bedding available for horse stalls. Common materials include shavings, straw, or sawdust. Shavings provide good cushioning for your horse, but they tend to be bulky and difficult to discard. Straw is cheaper, but it can be flammable when dry and slippery when wet.
What do you line horse stall walls with?
As for stall wall construction, hardwood is probably the best. Concrete or concrete block works very well if the stalls are lined with some type of wooden “kick board” to a height of about four feet.
How thick should horse stall walls be?
The walls of the stall should be at least four feet high and made from material strong enough to withstand the kick. Some commonly used materials are 1 ½ -inch-thick tongue and groove, full thickness (two inches) rough sawn lumber, or ¾-inch plywood topped with sheet metal.
Why are cedar shavings bad for horses?
Cedar wood is commonly used within shavings, however be aware that although cedar smells good it also has a large oil content which can irritate the lungs of your horse.
Is Pine bad for horses?
Several types of pine needles are toxic to horses. But it’s not just the needles that can cause serious problems. … The pine tree that poses the most serious risk to horses is the Ponderosa. This tree is also known as the Blackjack Pine, Western Yellow Pine, Rock Pine, and Bull Pine.